


Saltwater pumps
The Nova Salt W M-A is a multi- purpose submersible pump specifically constructed for use in salt water. Anti-corrosive and rust-proof materials.
Motor casing, shaft, screws and nuts made of stainless steel AISI 316.
Cable with tin plated conductors. Motor with thermic overload protection. Wear resistant shaft and impeller.
ELECTRICAL DATA | ||||
VOLTAGE 50 Hz | P1 MAX kW | P2 NOMINAL | In A | |
kW | HP | |||
1X230 V~ | 0,28 | 0,2 | 0,28 | 1,3 |
Turbidity
MODEL | CODE |
NOVA SALT W M-A | 60122652 |
Product PDF



3" Submersible pumps
C.R.I. 3″ Submersible pumps are built with thermoplastic impellers, diffusers and inbuilt check valve. All vital components of these pumps are made of corrosive resistance thermoplastic and the shaft is of S.S – 431. Pumps are multi stage centrifugal type. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency. The pump is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water
Clean, Thin, Non-aggresive, Non explosive, Clear, Cold, Fresh Water without abrasives, Solid particles or fibre having the following characteristics.
Temperature : Permissible amount of sand:
33°C (max.)
25 g/m3 (max.)
500 ppm (max.)
3000 ppm (max.)
1.004 (max.)
300 (max.)
1.75 x 106 m2/sec (max.) 50 ppm silica scale (max.) 6.5 to 8.5
Chlorine ion density Allowable solids
Specific gravity
Hardness (Drinking water) Viscosity
Turbidity
S3V-1H/10 | 814 | 358 | 456 | 1″ | 70 | 75 |
S3V-1H/16 | 966 | 358 | 608 | 1″ | 70 | 75 |
S3V-1H/23 | 1161 | 378 | 783 | 1″ | 70 | 75 |
S3V-1H/32 | 1406 | 398 | 1008 | 1″ | 70 | 75 |
S3V-1H/46 | 1847 | 438 | 1409 | 1″ | 70 | 75 |
Product PDF
Click here to view
